•  
  •  
Every Fencer has a different way of fencing and works with different soil types and terrain. 
Because of this all FENCEQUIP Post Drivers can be set up to suit your individual needs.
image-1615626-IMG_2582_(1)_copy.w640.jpg

HYDRAULIC HINGE

Available for 4.65m or 4.95m Masts.
We have designed the Hydraulic Hinge to have a smooth operation from parked to straight, making it very user friendly and safe.

Benefits include:
  • Allows you to have a taller mast and still be able to drive your tractor down the road and be under road legal height
  • Great for manoeuvring under and around trees
  • Hinged height is 3m making it great for transporting on a truck from job to job
  • Being able to store your Post Driver in a low shed increasing the life of your Post Driver.
image-1615971-IMG_2836.jpg
image-2950210-IMG_2536.w640.jpg

MAST SHIFT
  • The MD Mast Shift has 250mm of travel.
  • The HD Mast Shift can either come with 360mm or 410mm of travel
Mast Shift allows you to move the Post Driver forward and backwards when Side Mounted and left to right when Rear Mounted. This means if you do not park the tractor in the right place you can move the Post Driver to the mark without having to re-position the tractor.

When mast shifting the feet do not move allowing you to have more power when pushing posts around and not affecting the tractors stability.​​





image-1615629-IMG_3061.w640.jpg

​HYDRAULIC AUGER UNIT

• Auger Extractor has 8 Tonne of lift and includes a Post Lifting chain hook
• Hydraulic Turning available in both Near Side (Operators) and Far Side
• 1400mm of travel depth
• High Torque Planetry Drive Motor - 2000Nm of torque at 2500 PSI
• The Extractor Stem is made from 75mm Box Section
• 50mm HD Post Cap included
• Compact design
• Compatible with High Country Twin Guide


image-2951635-IMG_2231.w640.JPG
FENCEQUIP HARDOX Auger
with Multi-Faced Tungsten Pilots

​AUGERS
We supply two types of Augers:

Digga Augers with Multi-Faced Tungsten Tips
Sizes Available: 100mm, 150mm , 200mm & 250mm

FENCEQUIP Hardox Augers with Tungsten Bullets or Multi-Faced Tungsten
Pilots 
Our Augers are made with High Tensile Shafts & Hardox 450 Wear Plate Flighting.
Sizes Available: 125mm, 150mm & 175mm
These Augers have been tested in some of New Zealands harshest conditions, with great results.

image-2962579-IMG_7184.w640.jpg
FENCEQUIP HARDOX Auger
with Tungsten Bullets

HYDRAULIC TURNED ROCK SPIKE

• Allows you to rotate the Rock Spike with a pull of a lever
• HD & MD models available
• HD Rock Spike stem is made from 100mm Box Section with a 9mm wall thickness
• MD Rock Spike stem is made from 75mm Box Section 
• 90mm & 120mm Rock Spikes available in either solid or hollow with a hardened tip
• 8 Tonne of Lift
• 1400mm of depth travel
• 50mm HD Post Cap included
• Available in Near or Far Side 
• A very compact design gives you more room between Tractor and Post Driver
​• Makes Rock Spiking effortless on Hill Country
• Compatible with High Country Twin Guide

image-2950735-b73a4e5b-0261-47ac-b10a-608e9243d19c.w640.jpg

AUGER HEAD FOR ROCK SPIKE 

This option is great for people that need to Rock Spike as well as Drill.
The Auger head is easily mounted with 3 bolts.

• Compatible with both HD & MD Rock Spike Extractors
• 2000Nm of torque
• Auger Motor protected by a large steel hood
• Telescopic extention available
• Auger Motor can be mounted on a Excavator
• Compatible with High Country Twin Guide
​HIGH COUNTRY TWIN GUIDE & PINS

We were approached by a number of Fencing Contractors in the lower South Island to design and build an upgrade that was both retrofittable as well as practical for securing Rock Spikes, Auger Motors and Posts, when trying to navigate through hard/rocky ground. 

Features Include: 
• 4 Post Locating Pins
• 4 Chain Hook Heights
• Twin Guide System to Hold Rock Spikes & Augers as they are lowered down
• Can be used with or without a Post Cap (HD Blocks are fitted with a large bottom plate to make life easier when fencing without a Post Cap)
image-2959525-IMG_2551.w640.JPG
image-2951638-IMG_2564.w640.JPG
image-2958892-IMG_2561.JPG
image-2951641-IMG_2584.w640.JPG
image-2959396-IMG_2586.w640.JPG
image-1615980-IMG_2767.w640.jpg

POST LIFTER
The Post Lifter is a must when contracting. It has the ability to lift anything you can fit a chain around and has 6 Tonne of lifting power.

It allows you to pull out old broken strainers and replace them with new ones without re-positioning the tractor. This makes it extremely good for repair work.

Even when using new material, if you break a post while thumping it in the ground you can pull it out and put a new one down, without having to move the tractor, saving huge amounts of time.

FENCEQUIP Post Lifters have 610mm of stroke. Allowing you to extract a standard post with one pull.
image-1615974-IMG_1394.w640.jpg

​LEG ROLLER

Leg Rollers work well working in areas where you do not want to damage/tear up the ground e.g. working in vineyards or orchards where you do not want to damage the tree's roots.

They also work well on hill country rolling over the ground rather than pushing the tractor around. ​​
image-2950228-812221AA-2519-4978-A64A-B6558DB6FE24.w640.jpg

​HYDRAULIC FEET

• 175mm Lift
• 4 Tonne of power per foot

Our Hydraulic Feet are made out of 8mm High Tensile Hardox Wear Plate and include Ultra High Tensile 3.2mm Hardox Guards to protect Rams, Hoses and Fittings.


image-1615983-IMG_2875.jpg

​BLOCK UPGRADES

  • The HD Post Driver Block comes with Nylon Block slides and can be upgraded from the standard
       280 kg to 300 kg, 320 kg or 350 kg.
  • The MD Post Driver Block can be upgraded from the standard 
        225 kg to 255 kg or 270 kg.



image-1615992-IMG_3051.jpg

HEAVY DUTY POST-CAP - 50mm Thick

  • The HD Post Cap steel is twice the thickness of a standard one and comes with a Nylon Cap.
  • A HD Post Cap comes standard with the purchase of a Rock Spike or Auger Kit. 

  • It is recommended to upgrade to a HD Post Cap if you are constantly working in hard conditions.
image-2957131-fullsizeoutput_343.w640.jpeg

SPADES

Our spades were designed with the help of Fencing Contractor & Golden Pliers winner, Tim Stafford.

• 3.2mm Hardox 450 Wear Plate Head
• Light weight yet strong Stainless Steal Shaft
• Available in Short or Long Handle

​​